10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
83
Direct purchase from the factory 
নিশ্চিত সুৰক্ষিত চেকআউট
মুক্ত উপহাৰ
প্ৰেৰণ নীতি
ফিৰতী নীতিমুক্ত উপহাৰ
Roymall-লৈ স্বাগতম, প্ৰিমিয়াম ডিপাৰ্টমেণ্ট ষ্টোৰ উপহাৰ ক্ৰয় কৰাৰ বাবে আপোনাৰ পেছাদাৰী ৱেবছাইট। আমি আপোনাৰ সমৰ্থনক উচ্চ মূল্য দিওঁ আৰু প্ৰতিটো অৰ্ডাৰৰ সৈতে এক বিশেষ মুক্ত উপহাৰ আগবঢ়াই কৃতজ্ঞতা প্ৰকাশ কৰোঁ।প্ৰেৰণ নীতি
অৰ্ডাৰ গ্ৰহণৰ পিছত ২-৫ কৰ্মদিনত প্ৰেৰণ কৰা হয়। $৯.৯ ৰ ওপৰৰ অৰ্ডাৰত মুক্ত প্ৰেৰণ সেৱা।১. ফিৰতী আৰু সলনি নীতি
বস্তু গ্ৰহণৰ পৰা ৪০ দিনৰ ভিতৰত ফিৰত দিব পাৰি। কাষ্টমাইজ বস্তু ফিৰত দিব নোৱাৰি।২. ৰিফাণ্ড নীতি
ফিৰত দিয়া বস্তু পৰীক্ষা কৰাৰ পিছত সম্পূৰ্ণ ৰিফাণ্ড দিয়া হয়।
nt10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
nt
ntDescription:
nt
ntCharging method: linear charge 1%
ntCharging current: 1A adjustable
ntCharge accuracy: 1.5%
ntInput voltage: 4.5V-5.5V
ntFull charge voltage: 4.2V
ntCharging indicator: Red charging green full charge
ntCharging input interface: Mini USB
ntWorking temperature: -10°C to +85°C
ntReverse: NO
ntSize: 25 x 19 x 10mm
nt
ntNote:
nt
ntAmpere meter can only be connected to 5V input end of the module.
ntIt is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
ntThe connection wire should not be too long.
ntMake sure the connect point is good.
ntIf the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
ntInput reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
nt
ntApplications:
nt
ntThis module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
nt
ntPackage included:
nt
nt10 x 1A lithium battery charging modulen
nt
ntDescription:
nt
ntCharging method: linear charge 1%
ntCharging current: 1A adjustable
ntCharge accuracy: 1.5%
ntInput voltage: 4.5V-5.5V
ntFull charge voltage: 4.2V
ntCharging indicator: Red charging green full charge
ntCharging input interface: Mini USB
ntWorking temperature: -10°C to +85°C
ntReverse: NO
ntSize: 25 x 19 x 10mm
nt
ntNote:
nt
ntAmpere meter can only be connected to 5V input end of the module.
ntIt is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
ntThe connection wire should not be too long.
ntMake sure the connect point is good.
ntIf the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
ntInput reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
nt
ntApplications:
nt
ntThis module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
nt
ntPackage included:
nt
nt10 x 1A lithium battery charging modulen
nt
nt
nt
nt
